HVAC Certification Training in Springville AL 35146

Home > Alabama

The HVAC industry is a very competitive field in the United States. There are many technicians vying for the most lucrative jobs and contracts. In order to successfully compete with these technicians, you must acquire the appropriate s and licenses. Different states have their own sets of rules and regulations for HVAC technicians and contractors. However, at the national level, there
Springville AL 35146 are two very well-known and respected certifications you can obtain. One is offered by the Environmental Protection Agency (EPA) and the other by the North American Technician Excellence (NATE). Possession of these certifications demonstrates to employers and contractors that a technician has sufficient HVAC training and knowledge to succeed at and complete the job at hand.
1     EPA Certification

The Federal Clean Air Act states Springville AL 35146 that technicians who work with regulated refrigerants must become EPA-certified. The EPA defines four types of certifications that a technician can obtain:

  • Type I: Allows a person to work on small appliances that contain at most 5 pounds of refrigerant.
  • Type II: Allows a person to work on medium, high, and very high pressure appliances.
  • Type III: Allows a person to work
    Springville AL 35146 on low pressure appliances.
  • Universal: Given to those who have attained all three of the certifications listed above.

In order to acquire EPA certification, a technician has to pass a paper exam. This exam has four distinct parts, each containing 25 multiple-choice problems. The passing score on each section is 70% (that is, you must answer at least 18 of the 25 problems Springville AL 35146 in a given section correctly in order to pass that section). The first section is named the Core. It covers material that applies to all of the other three certification areas.
3 This material includes EPA regulations, the environmental impact of refrigerants, chlorofluorocarbons, hydrochlorofluorocarbons, and more. A technician first has to pass the Core in order to obtain any of the certifications above. Springville AL 35146 The other three sections correspond to topics relevant to the Type I, Type II, and Type III certifications.

NATE Certification

NATE offers a variety of certification types for a number of specialty areas within the HVAC industry. However, these certifications are not absolutely mandatory to perform any HVAC work. Despite this being the case, the majority of contractors and employers are familiar with this Springville AL 35146 credential, and are more likely to want to work with a technician possessing NATE certification.

Each specialty area for NATE certification belongs in one of three categories: Installation, Service, and Senior. The first two contain the following specialty options:

  • Light Commercial Refrigeration
  • Commercial Refrigeration
  • Hydronics Oil
  • Hydronics Gas
  • Oil Heating (Air)
  • Gas Heating (Air)
  • Air-to-Air Heat Pumps
  • Air Conditioning
  • Air Distribution

The last category Springville AL 35146 (Senior) is coupled with the HVAC Efficiency Analyst certification. To obtain this certification, you must first acquire two other NATE certifications belonging to the Installation and/or Service categories. Note that only certain specific pairs of certifications will meet this requirement.
2 Regardless of the specialty, a technician has to take and pass two written exams, the Core exam and the Specialty exam, before receiving Springville AL 35146 any certification. The Core consists of 50 multiple-choice questions. The passing score is 70%, so you must answer at least 35 of the 50 questions correctly. This exam covers general topics including safety, tools, applicable science, and more. On the other hand, the Specialty exam consists of 100 multiple-choice questions. The passing score is again 70%, so you must answer at least Springville AL 35146 70 of the 100 questions correctly. This Specialty exam covers topics relevant to the specialty area in question.

heating and air schoolfree hvac/r training

 

Surrounding Areas In Alabama

  • HVAC Certification Training in Oxford AL 72565
  • HVAC Certification Training in Florence AL 35630
  • HVAC Certification Training in Grove Hill AL 36451
  • HVAC Certification Training in Brownsboro AL 35741
  • HVAC Certification Training in Winfield AL 35594
  • HVAC Certification Training in Mobile AL 36601
  • HVAC Certification Training in Marion AL 36756
  • HVAC Certification Training in Daleville AL 36322
  • HVAC Certification Training in Coffeeville AL 36524
  • HVAC Certification Training in Cottondale AL 35453
  • Springville Information

    Video: HVAC Certification in Springville AL

    [ssyelp location="Springville AL" term="schools" limit="10"]

    HVAC Certification Training in Newton AL 36352

    Home > Alabama

    An HVAC technician can enjoy a variety of benefits including job stability and a hands-on career field. As you complete your HVAC training, make sure to get the right certification and licensing to start you out on a good path to success.
    1     Just follow these 4 simple steps:

      1. Complete an HVAC training program.
      2. Take your or licensing or exams.
      3. Apply for an HVAC apprenticeship.
      4. Apply for entry level HVAC technician jobs.

    Newton AL 36352

    1. Complete an HVAC training program.

    Enroll in an HVAC training program at a local HVAC training school. You can usually complete these programs in less than 2 years. Some colleges may even award you with an associate degree in the process.

    2. Take your or licensing exams.

    Licensing in Colorado

    Some states will require heating, air-conditioning, and refrigeration mechanics and installers to be licensed, others will not. Colorado happens to be one of Newton AL 36352 the states that allow licensing for HVAC technicians to be handled at the county level. Each county may or may not require licensing through their respective building departments. However, it is a good idea to look into it if it’s available, for the purpose of doing work that requires permits.

    For details on how to get your Heating Mechanic IV license in El Paso County, for example, visit the Contractor Licensing & Registration
    Newton AL 36352 page at the Pikes Peak Regional Building Department (Pikes Peak RBD) website.
    3 If you choose to work in refrigeration you will need to be certified in EPA 608, as required by federal law. For this you must pass a written exam specific to the types of equipment and refrigerants you will be handling. Most quality HVAC training programs include federal EPA 608 training and certification preparation.

    Being certified in the HVAC field can Newton AL 36352 allow for higher paying jobs. In the HVAC Excellence program there are several certification exams to choose from for students just starting out. Professional level certifications are also available and require employment verifications and core testing to advance your career. Check them out!

    15 Employment Ready s

    1. Electrical – Suggested prerequisite for all other certifications in the HVAC Excellence program
    2. Light Commercial Air Conditioning
    3. Air Conditioning
    4. Basic Refrigeration and Charging Procedures
    5. Electric Newton AL 36352 Heat
    6. Gas Heat Certification
    7. Oil Heat
    8. Residential and Light Commercial Hydronic Heat
    9. Heat Pump
    10. Carbon Monoxide
    11. System Diagnostics and Troubleshooting Procedures
    12. Fuel Oil Combustion
    13. Natural Gas Combustion Analysis
    14. Carbon Monoxide and Combustion Analysis
    15. Light Commercial Refrigeration

    Take advantage of what’s out there, like specialized HVAC training schools, hands-on training, and a multitude of certifications. Now that you know what you have to do and where to get it done, you can be Newton AL 36352 on your way to a new career as an HVAC Technician.

    3. Apply for an HVAC apprenticeship.

    After completing your HVAC training, you may choose an apprenticeship as your next step. Simply apply to or enroll in an apprenticeship program with an experienced HVAC organization in your area. Learn everything they have to offer and put it to practice. Your apprenticeship may last anywhere from 6 to 36 months.

    4. Apply for entry level HVAC Newton AL 36352 Technician jobs.

    You can also enter the HVAC field directly after completing a training program and receiving your degree and/or certifications. Many HVAC contractors and employers often hire entry level HVAC technicians to “train in” to their organizations.
    2 Many HVAC programs offer career placement assistance for graduates. Contact your local  today and you can be on your way to a rewarding career in HVAC with a good transcript Newton AL 36352 and a healthy resume.

    Sources

    • Pikes Peak Regional Building Department, Contractors Licensing and Registration, pprbd.org/contfiles/ContLicensing.aspx
    • HVAC Excellence, Technician Certification, hvacexcellence.org/EmploymentReady.aspx
    • United States Department of Labor, Bureau of Labor Statistics, Occupational Outlook Handbook 2010-11 Edition, bls.gov/oco/ocos192.htm

    hvac-r training dvdsrefrigeration certification

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Bessemer AL 35020
  • HVAC Certification Training in Montevallo AL 35115
  • HVAC Certification Training in Centreville AL 35042
  • HVAC Certification Training in Huntsville AL 35801
  • HVAC Certification Training in Mobile AL 36601
  • HVAC Certification Training in Tuskegee AL 36083
  • HVAC Certification Training in Calhoun County AL
  • HVAC Certification Training in Elba AL 36323
  • HVAC Certification Training in Addison AL 35540
  • HVAC Certification Training in Oakman AL 35579
  • Newton Information

    Video: HVAC Certification in Newton AL

    [ssyelp location="Newton AL" term="schools" limit="10"]

    HVAC Certification Training in Autaugaville AL 36003

    Home > Alabama

    There are a variety of ways to get . The certification is received by passing an exam that is administered by one of several sources. Three types of certification are available – small appliances, low pressure and high pressure. After selecting one type, a core skills test is taken and after successfully passing this test, an exam is taken for the type of
    Autaugaville AL 36003 certification desired.
    1     If universal certification is desired, the core skills test for each type must be passed and then the certification exam taken and passed. The Environmental Protection Agency (EPA) and North American Technicians Excellence (NATE) offer certification and NATE offers national certification. The basics for certification from NATE requires a minimum amount of work experience as well as passing an exam containing typical HVAC Autaugaville AL 36003 topics.

    The Formal Apprenticeship

    Often an apprenticeship is chosen for by those who want to become HVAC certified. This includes work experience and classroom work. This is an option that allows the apprentice to get paid while working under the supervision of a certified technician. Additionally they will receive the training necessary for certification. This is a major benefit, especially for those who did not choose
    Autaugaville AL 36003 this field early.

    The requirement for a formal apprenticeship is generally a high school diploma or a GED. This method can take between 2 years and 5 years before the apprentice is ready to take the exam for certification. The classroom work will cover blueprints – both drawing and reading – as well as heating, air conditioning, ventilation and refrigeration theory and design.
    3 Trade Schools

    Trade schools Autaugaville AL 36003 are another method of getting the training required to become HVAC certified. A trade school or vocational school curriculum can be completed within 6 months to 2 years. If subjects in high school were taken such as chemistry, math, electronics and applied physics, this is beneficial for those who take HVAC training. The subjects covered in trade school will include design and construction, electronics, Autaugaville AL 36003 mechanical drawing and reading, installation and the repair and maintenance of the systems.

    If this method is chosen, the school being considered should be an accredited school. This will allow certification afterward and ensure the quality of the training being received. The successful graduate of trade school will need 1 to 2 years of experience as well to be considered skilled in this field.
    2 Online Courses Autaugaville AL 36003 for HVAC Training

    Becoming HVAC certified can also be accomplished by taking online courses. The major advantage to this method is working at a comfortable pace. The courses should have advanced training software as well as computer simulations as this method does not include the ‘hands on’ training of other methods. The online course should also be from an accredited school. Ensuring the software Autaugaville AL 36003 used is up-to-date is another requirement. This allows the student to get the training required to pass the certification exam.

    All the methods used to become HVAC certified are good ways to receive the training required. Deciding which type to use will require choosing the one that is best suited to the needs of the trainee and the certification they intend to seek.

    hvac tech schooltri c hvac training

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Loxley AL 36551
  • HVAC Certification Training in Abbeville AL 36310
  • HVAC Certification Training in Locust Fork AL 35097
  • HVAC Certification Training in Notasulga AL 36866
  • HVAC Certification Training in Chelsea AL 35043
  • HVAC Certification Training in Ft Deposit AL
  • HVAC Certification Training in Crossville AL 35962
  • HVAC Certification Training in Saginaw AL 35137
  • HVAC Certification Training in Helena AL 35080
  • HVAC Certification Training in Hazel Green AL 35750
  • Autaugaville Information

    Video: HVAC Certification in Autaugaville AL

    [ssyelp location="Autaugaville AL" term="schools" limit="10"]

    HVAC Certification Training in Union Springs AL 36089

    Home > Alabama

    The HVAC industry is a very competitive field in the United States. There are many technicians vying for the most lucrative jobs and contracts. In order to successfully compete with these technicians, you must acquire the appropriate s and licenses. Different states have their own sets of rules and regulations for HVAC technicians and contractors. However, at the national level, there
    Union Springs AL 36089 are two very well-known and respected certifications you can obtain. One is offered by the Environmental Protection Agency (EPA) and the other by the North American Technician Excellence (NATE). Possession of these certifications demonstrates to employers and contractors that a technician has sufficient HVAC training and knowledge to succeed at and complete the job at hand.
    1     EPA Certification

    The Federal Clean Air Act states Union Springs AL 36089 that technicians who work with regulated refrigerants must become EPA-certified. The EPA defines four types of certifications that a technician can obtain:

    • Type I: Allows a person to work on small appliances that contain at most 5 pounds of refrigerant.
    • Type II: Allows a person to work on medium, high, and very high pressure appliances.
    • Type III: Allows a person to work
      Union Springs AL 36089 on low pressure appliances.
    • Universal: Given to those who have attained all three of the certifications listed above.

    In order to acquire EPA certification, a technician has to pass a paper exam. This exam has four distinct parts, each containing 25 multiple-choice problems. The passing score on each section is 70% (that is, you must answer at least 18 of the 25 problems Union Springs AL 36089 in a given section correctly in order to pass that section). The first section is named the Core. It covers material that applies to all of the other three certification areas.
    3 This material includes EPA regulations, the environmental impact of refrigerants, chlorofluorocarbons, hydrochlorofluorocarbons, and more. A technician first has to pass the Core in order to obtain any of the certifications above. Union Springs AL 36089 The other three sections correspond to topics relevant to the Type I, Type II, and Type III certifications.

    NATE Certification

    NATE offers a variety of certification types for a number of specialty areas within the HVAC industry. However, these certifications are not absolutely mandatory to perform any HVAC work. Despite this being the case, the majority of contractors and employers are familiar with this Union Springs AL 36089 credential, and are more likely to want to work with a technician possessing NATE certification.

    Each specialty area for NATE certification belongs in one of three categories: Installation, Service, and Senior. The first two contain the following specialty options:

    • Light Commercial Refrigeration
    • Commercial Refrigeration
    • Hydronics Oil
    • Hydronics Gas
    • Oil Heating (Air)
    • Gas Heating (Air)
    • Air-to-Air Heat Pumps
    • Air Conditioning
    • Air Distribution

    The last category Union Springs AL 36089 (Senior) is coupled with the HVAC Efficiency Analyst certification. To obtain this certification, you must first acquire two other NATE certifications belonging to the Installation and/or Service categories. Note that only certain specific pairs of certifications will meet this requirement.
    2 Regardless of the specialty, a technician has to take and pass two written exams, the Core exam and the Specialty exam, before receiving Union Springs AL 36089 any certification. The Core consists of 50 multiple-choice questions. The passing score is 70%, so you must answer at least 35 of the 50 questions correctly. This exam covers general topics including safety, tools, applicable science, and more. On the other hand, the Specialty exam consists of 100 multiple-choice questions. The passing score is again 70%, so you must answer at least Union Springs AL 36089 70 of the 100 questions correctly. This Specialty exam covers topics relevant to the specialty area in question.

    hvac training costheating and cooling training

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Munford AL 36268
  • HVAC Certification Training in Guntersville AL 35976
  • HVAC Certification Training in Berry AL 35546
  • HVAC Certification Training in Dauphin Island AL 36528
  • HVAC Certification Training in Toney AL 35773
  • HVAC Certification Training in Montevallo AL 35115
  • HVAC Certification Training in Locust Fork AL 35097
  • HVAC Certification Training in Cherokee AL 35616
  • HVAC Certification Training in Sulligent AL 35586
  • HVAC Certification Training in Gardendale AL 35071
  • Union Springs Information

    Video: HVAC Certification in Union Springs AL

    [ssyelp location="Union Springs AL" term="schools" limit="10"]

    HVAC Certification Training in Clayton AL 36016

    Home > Alabama

    As skilled HVAC technicians begin to retire, the demand for new technicians continues to grow. Over the next few years, the HVAC field is expected to rapidly grow. While those specializing in installation may currently struggle to find employment (until the number of new constructions increase), individuals specializing in HVAC maintenance and repair work should see definite job stability.
    1     In order for new or potential technicians to
    Clayton AL 36016 see the benefit in this growth, they must obtain the appropriate HVAC training and education. Those who have completed HVAC courses and obtained certification are well positioned to benefit from the need for technicians. In order to become certified in this field, one must enroll in and successfully complete HVAC classes. There are a number of ways in which to obtain the educational requirements for this Clayton AL 36016 field. Many colleges, universities and trade schools offer training in heating, air-conditioning and refrigeration. There are also opportunities to complete HVAC training online that provide students with the ability to study heating and air-conditioning courses at their own pace and in the comfort of their own homes. Online training has quickly become one of the most popular ways for students to obtain their higher education goals.

    HVAC
    Clayton AL 36016 classes typically include the basics of refrigeration, components, recycling and evacuation, as well as resistance, current, power and voltage in AC and DC circuits. Computations of series, parallel circuits, troubleshooting and circuit analysis are also studied in order to prepare students for a career in this field.
    3 In order to become certificated in HVAC, an apprenticeship of one to five years is normally required, depending on the Clayton AL 36016 state or locality in which the student plans to work. This apprenticeship provides the new technician with on the job learning as well as opportunities to demonstrate that their skills are up to par.

    Many HVAC courses, even those provided online, have prerequisites that the student must complete before being permitted to take the course. For instance, before taking a course on installation of piping materials used Clayton AL 36016 in plumbing and/or HVAC systems, the student may need to complete a class on Construction Industry Standards. Prerequisite requirements can be checked by looking through the admissions booklet or online schedule of courses for the school the student plans to attend.
    2 Courses can also be taken if a student or new technician plans to specialize in one or more areas. Refrigeration is one specialty that many new Clayton AL 36016 technicians choose and certification is achieved after successful completion of specific classes and the passing of the certification examination.

    Given the amount of time it takes to prepare for a career in the HVAC industry, the job prospects for this field are excellent. Even those who are required to work in apprenticeships are virtually guaranteed employment after successful completion of the required HVAC classes. Those who work Clayton AL 36016 in apprenticeships typically begin their careers by assisting certified technicians, giving them the experience that they need to advance their own careers in the future.

    air conditioning traininghvac trade school

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Robertsdale AL 36567
  • HVAC Certification Training in Rutledge AL 36071
  • HVAC Certification Training in Pennington AL 36916
  • HVAC Certification Training in Tuscumbia AL 35674
  • HVAC Certification Training in Lillian AL 36549
  • HVAC Certification Training in Fultondale AL 35068
  • HVAC Certification Training in Graysville AL 35073
  • HVAC Certification Training in Axis AL 36505
  • HVAC Certification Training in Killen AL 35645
  • HVAC Certification Training in Ashland AL 36251
  • Clayton Information

    Video: HVAC Certification in Clayton AL

    [ssyelp location="Clayton AL" term="schools" limit="10"]

    HVAC Certification Training in Winfield AL 35594

    Home > Alabama

    Heating, ventilation and air conditioning (HVAC) technicians are skilled tradespersons that install heating and cooling systems. Additionally, they maintain and repair the system when problems arise. This may be in a residential setting or for commercial facilities. Those who work for a retailer are often responsible for selling service contracts to clients.
    1     Types of Certification

    Becoming HVAC certified will depend on the type of certification that you desire and the training that you have achieved. Since
    Winfield AL 35594 many people work in the field under a licensed HVAC person, they may have some experience before taking classes. Those who have over a year of experience in installation and at least 2 years in maintenance will have a wider choice when it comes to the type of they choose.

    In order to become certified, the proper classes must be taken. Before doing so, a high school diploma or GED is required. This Winfield AL 35594 is required for admittance to most accredited HVAC training programs. These programs offer classes in the installation and repair of HVAC as well as reading blueprints, temperature control, construction and equipment design. The programs are available at various schools and colleges as well as online.
    3 The programs are generally from six months to two years and depending on the length of the course, upon successful completion, the student will receive a certificate or an associate’s
    Winfield AL 35594 degree. There are also opportunities available for those who join the Armed Forces to receive specialized training in the HVAC field.

    Licensing

    After completing the training program successfully, earning a certification or a degree, sitting for the HVAC licensing exam will be required by most states to work in this field. The licensing exam will differ somewhat from one location to another. The main consideration is the knowledge of all the aspects of installation and repair Winfield AL 35594 of HVAC systems. In addition, some licensing exams require the applicant to know electrical codes.
    1     If the career chosen will include working with refrigerants, a separate certification is needed for this field. This includes high and low-pressure refrigerants and servicing small appliances. When this career is chosen at an early age, usually while in high school, it is beneficial to take classes that can help in preparing the student for the classes they will take Winfield AL 35594 next. The basic recommendations are mathematics, physics, electronics and mechanical drawing.

    There are additional licenses needed if the HVAC career will include contractor services. This is often a career that is chosen after learning the other aspects of HVAC. The qualifications to apply for a license as an HVAC contractor include being at least 18 years of age, speaking and reading the English language and four years of verifiable experience in warm heating.
    2 If the applicant Winfield AL 35594 meets these qualifications, they must take an ICC examination. The International Code Council (ICC) develops these exams and they are in charge of giving them for many states. They are given at approved testing sites across the nation and are required for anyone that represents themselves in any way as an HVAC contractor.

    As seen, the HVAC career is quite diverse. It can include various aspects of this profession, each having their own requirements and Winfield AL 35594 licenses.

    hvac r training instituteheating and air conditioning courses

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Pell City AL 35125
  • HVAC Certification Training in Ashford AL 36312
  • HVAC Certification Training in Columbiana AL 35051
  • HVAC Certification Training in Gordo AL 35466
  • HVAC Certification Training in Tuscumbia AL 35674
  • HVAC Certification Training in Elberta AL 36530
  • HVAC Certification Training in Montrose AL 36559
  • HVAC Certification Training in Mathews AL 36052
  • HVAC Certification Training in Hodges AL 35571
  • HVAC Certification Training in Daleville AL 36322
  • Winfield Information

    Video: HVAC Certification in Winfield AL

    [ssyelp location="Winfield AL" term="schools" limit="10"]

    HVAC Certification Training in Tallassee AL 36078

    Home > Alabama

    An HVAC technician can enjoy a variety of benefits including job stability and a hands-on career field. As you complete your HVAC training, make sure to get the right certification and licensing to start you out on a good path to success.
    1     Just follow these 4 simple steps:

      1. Complete an HVAC training program.
      2. Take your or licensing or exams.
      3. Apply for an HVAC apprenticeship.
      4. Apply for entry level HVAC technician jobs.

    Tallassee AL 36078

    1. Complete an HVAC training program.

    Enroll in an HVAC training program at a local HVAC training school. You can usually complete these programs in less than 2 years. Some colleges may even award you with an associate degree in the process.

    2. Take your or licensing exams.

    Licensing in Colorado

    Some states will require heating, air-conditioning, and refrigeration mechanics and installers to be licensed, others will not. Colorado happens to be one of Tallassee AL 36078 the states that allow licensing for HVAC technicians to be handled at the county level. Each county may or may not require licensing through their respective building departments. However, it is a good idea to look into it if it’s available, for the purpose of doing work that requires permits.

    For details on how to get your Heating Mechanic IV license in El Paso County, for example, visit the Contractor Licensing & Registration
    Tallassee AL 36078 page at the Pikes Peak Regional Building Department (Pikes Peak RBD) website.
    3 If you choose to work in refrigeration you will need to be certified in EPA 608, as required by federal law. For this you must pass a written exam specific to the types of equipment and refrigerants you will be handling. Most quality HVAC training programs include federal EPA 608 training and certification preparation.

    Being certified in the HVAC field can Tallassee AL 36078 allow for higher paying jobs. In the HVAC Excellence program there are several certification exams to choose from for students just starting out. Professional level certifications are also available and require employment verifications and core testing to advance your career. Check them out!

    15 Employment Ready s

    1. Electrical – Suggested prerequisite for all other certifications in the HVAC Excellence program
    2. Light Commercial Air Conditioning
    3. Air Conditioning
    4. Basic Refrigeration and Charging Procedures
    5. Electric Tallassee AL 36078 Heat
    6. Gas Heat Certification
    7. Oil Heat
    8. Residential and Light Commercial Hydronic Heat
    9. Heat Pump
    10. Carbon Monoxide
    11. System Diagnostics and Troubleshooting Procedures
    12. Fuel Oil Combustion
    13. Natural Gas Combustion Analysis
    14. Carbon Monoxide and Combustion Analysis
    15. Light Commercial Refrigeration

    Take advantage of what’s out there, like specialized HVAC training schools, hands-on training, and a multitude of certifications. Now that you know what you have to do and where to get it done, you can be Tallassee AL 36078 on your way to a new career as an HVAC Technician.

    3. Apply for an HVAC apprenticeship.

    After completing your HVAC training, you may choose an apprenticeship as your next step. Simply apply to or enroll in an apprenticeship program with an experienced HVAC organization in your area. Learn everything they have to offer and put it to practice. Your apprenticeship may last anywhere from 6 to 36 months.

    4. Apply for entry level HVAC Tallassee AL 36078 Technician jobs.

    You can also enter the HVAC field directly after completing a training program and receiving your degree and/or certifications. Many HVAC contractors and employers often hire entry level HVAC technicians to “train in” to their organizations.
    2 Many HVAC programs offer career placement assistance for graduates. Contact your local  today and you can be on your way to a rewarding career in HVAC with a good transcript Tallassee AL 36078 and a healthy resume.

    Sources

    • Pikes Peak Regional Building Department, Contractors Licensing and Registration, pprbd.org/contfiles/ContLicensing.aspx
    • HVAC Excellence, Technician Certification, hvacexcellence.org/EmploymentReady.aspx
    • United States Department of Labor, Bureau of Labor Statistics, Occupational Outlook Handbook 2010-11 Edition, bls.gov/oco/ocos192.htm

    air conditioning technicianhvac diploma

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Huntsville AL 35801
  • HVAC Certification Training in Coffeeville AL 36524
  • HVAC Certification Training in Grove Hill AL 36451
  • HVAC Certification Training in Fulton AL 36446
  • HVAC Certification Training in Alabaster AL 35007
  • HVAC Certification Training in Ider AL 35981
  • HVAC Certification Training in Pine Hill AL 36769
  • HVAC Certification Training in Goodwater AL 35072
  • HVAC Certification Training in Chelsea AL 35043
  • HVAC Certification Training in Sylacauga AL 35150
  • Tallassee Information

    Video: HVAC Certification in Tallassee AL

    [ssyelp location="Tallassee AL" term="schools" limit="10"]

    HVAC Certification Training in Graysville AL 35073

    Home > Alabama

    HVAC training is offered in a variety of formats, including initial training and continuing education. Programs are available for the training needed to obtain certification or a degree in heating, ventilation and air conditioning or heating and refrigeration. This training will vary depending upon the type of degree or certification desired. This can include an associate’s degree or a bachelor’s degree, which will require from two to four years of education. The length of
    Graysville AL 35073 time for certification programs will differ depending on the program.
    1     General or Specialized Training

    HVAC training encompasses the fields of refrigeration, air conditioning, ventilation systems and heating technology. The technologies differ, but due to the close relationship between the systems, many students choose a generalized education in this field while others specialize.

    The specific areas of training available for heating and refrigeration will include building codes, refrigeration technology, heating design, ventilation, electronics technology and indoor air standards Graysville AL 35073 among others. The heating, ventilation and air conditioning field will include study in electronics, equipment construction, design theory, blueprint reading, installation and maintenance.

    There are numerous opportunities for those who wish to enter this high-demand field. From universities to online courses and apprenticeships, those who are interested in a career can find the specific program that meets their needs. The demand for professionals in the field is growing and is expected to continue.
    3 HVAC training includes:
    Graysville AL 35073

    • Knowledge of HVAC equipment and the methods in which they are used
    • Environmental issues
    • Handling chlorofluorocarbons and refrigerants in a safe and responsible manner
    • Health issues on air quality
    • Energy efficiency
    • Safety issues

    Even though apprenticeship is an option for learning the basics in this field, a school is the best option to obtain a degree or certification. This will allow the highest potential earnings. Trade schools will offer programs in HVAC training Graysville AL 35073 that will typically require from 6 months to 2 years of education. This will cover the following:

    • Operation
    • Design
    • Construction
    • Installation
    • Maintenance
    • Repair

    A more inclusive program will also include training in areas such as blueprint reading, computer applications, electronics, applied physics, mechanical drawing and shop mathematics. Completion of training and passing the licensing exam will be required for certification.

    Degrees in HVAC and HVAC/R

    As stated, many choose a career in HVAC as well Graysville AL 35073 as refrigeration since the fields are so closely related. A bachelor’s degree can include basic classes as well as advanced. The mechanics of each of the systems include courses in the same basics that are required by trade schools. Additionally they require courses including schematics, drawings, specifications, estimating, industry codes, regulations and Computer-Aided Drafting and Design.

    The Bachelor’s Degree

    The bachelor’s degree will provide students with the necessary skills for complying with environmental laws, HVAC/R building Graysville AL 35073 codes and regulations that include local, state and federal procedures. In addition, they will learn how to perform inspections, design, testing and maintain heating, cooling and refrigeration systems, estimate costs and read specifications and blueprints.

    Skills learned in the bachelor’s degree program will provide students with the knowledge to install systems as well as improve energy efficiency, repair defects or dangerous leaks and provide required climate control.

    The Associate’s Degree

    An associate’s degree in HVAC will Graysville AL 35073 include the basics of servicing the systems. Included are troubleshooting, American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE) standards, psychometrics, thermal comfort, air distribution and indoor air quality. The student will learn how to install, service, find and eliminate problems associated with the control mechanisms including relays, pneumatics and HVAC Ethernet controls.
    2 Online Certificate Programs

    Online certificate programs are available. There are two – HVAC installation and repair or design of HVAC systems. The Graysville AL 35073 training to learn installation and repair and prepare for entry-level positions require 320 credit hours, which will include up to 16 courses. This program is designed to prepare students for entry-level positions. After receiving the online certificate, the North American Technician Excellence Certification Examination may be taken.

    When choosing HVAC training, such as the certification program for design, this will require completion of 4 to 5 courses. In addition, experience in engineering as well as Graysville AL 35073 a bachelor’s degree is required. The opportunities afforded by completing certification and degree programs include competitive salaries and many receive other benefits such as company cars, bonuses and reimbursement for further training.

    hvac technicianstri c hvac training

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Orange Beach AL 36561
  • HVAC Certification Training in Jack AL 36346
  • HVAC Certification Training in Ft Deposit AL
  • HVAC Certification Training in Autaugaville AL 36003
  • HVAC Certification Training in Evergreen AL 36401
  • HVAC Certification Training in Pennington AL 36916
  • HVAC Certification Training in Gardendale AL 35071
  • HVAC Certification Training in Prattville AL 36066
  • HVAC Certification Training in Bucks AL 36512
  • HVAC Certification Training in Gadsden AL 35901
  • Graysville Information

    Video: HVAC Certification in Graysville AL

    [ssyelp location="Graysville AL" term="schools" limit="10"]

    HVAC Certification Training in Childersburg AL 35044

    Home > Alabama

    Heating, air conditioning, and ventilation technician job opportunities are growing. The Bureau of Labor Statistics estimates that the demand for workers will expand by 34 percent over the next several years, making it one of the fastest growing industrial job fields. To get into this field, however, you need HVAC training and certification.
    1     What Does an HVAC Technician Do?

    When you are a heating,
    Childersburg AL 35044 ventilation, and air conditioning technician, your job is to install, diagnose, and repair air conditioning and heating units. You will also be responsible for installing and repairing ventilation systems. On occasion, you may even have to install and repair refrigeration units.

    You can choose to work with a company or operate as an independent contractor. The opportunities are limitless, as you can be Childersburg AL 35044 working on heat and air for homes, apartment complexes, schools, offices, government agencies, and even hospitals. These technicians are also responsible for installing units in new buildings, so you may be at a construction site from time to time.

    How Do You Get Certified?

    In order to work in this field, you need to obtain your certification. HVAC training is primarily offered at trade
    Childersburg AL 35044 schools, online, and at local community colleges. While the period varies from institution to institution, you could have your certification in as little as six months. Some programs take up to a year to complete.
    3 While you are in the program, you will learn about system design and specifications. You will also receive education on building codes, facilities, and energy management. Courses also Childersburg AL 35044 cover ductwork and piping systems. Experience is gained through several hands-on activities, which are usually included in most curriculums. HVAC training prepares you to obtain your license and begin working shortly after graduation.

    Do You Need A License?

    Once you have completed your education, you will most likely need a license from an authorized organization or regional government. Before taking a state examination, you Childersburg AL 35044 will need to provide proof that you’ve completed a course. Some states also require that applicants complete a certain number of hours under the supervision of a licensed technician before sitting for the exam. Your school should be able to tell you exactly what you need to do in order to get your license.

    Should You Take Continuing Education Classes?
    2 Once you’ve received your Childersburg AL 35044 license, it is not the end of your HVAC training. Technology is constantly changing, and systems are increasingly becoming more efficient and advanced. In order to stay abreast of all the changes, you will need to take some continuing education courses on newer systems. Not all states require this, but it will give you a competitive advantage. Typically, you can take these Childersburg AL 35044 classes where you originally obtained your certification.

    HVAC training is an investment in your future. With demand for this profession expected to rise, maybe it’s time for you to consider a career change.

    heating and air conditioning traininghvac/r training

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Valley AL 36854
  • HVAC Certification Training in Mobile AL 36601
  • HVAC Certification Training in Hanceville AL 35077
  • HVAC Certification Training in Grove Hill AL 36451
  • HVAC Certification Training in Blountsville AL 35031
  • HVAC Certification Training in Sylacauga AL 35150
  • HVAC Certification Training in Deatsville AL 36022
  • HVAC Certification Training in Chelsea AL 35043
  • HVAC Certification Training in Hope Hull AL 36043
  • HVAC Certification Training in Alpine AL 35014
  • Childersburg Information

    Video: HVAC Certification in Childersburg AL

    [ssyelp location="Childersburg AL" term="schools" limit="10"]

    HVAC Certification Training in Axis AL 36505

    Home > Alabama

    Heating, ventilation and air conditioning (HVAC) technicians are skilled tradespersons that install heating and cooling systems. Additionally, they maintain and repair the system when problems arise. This may be in a residential setting or for commercial facilities. Those who work for a retailer are often responsible for selling service contracts to clients.
    1     Types of Certification

    Becoming HVAC certified will depend on the type of certification that you desire and the training that you have achieved. Since
    Axis AL 36505 many people work in the field under a licensed HVAC person, they may have some experience before taking classes. Those who have over a year of experience in installation and at least 2 years in maintenance will have a wider choice when it comes to the type of they choose.

    In order to become certified, the proper classes must be taken. Before doing so, a high school diploma or GED is required. This Axis AL 36505 is required for admittance to most accredited HVAC training programs. These programs offer classes in the installation and repair of HVAC as well as reading blueprints, temperature control, construction and equipment design. The programs are available at various schools and colleges as well as online.
    3 The programs are generally from six months to two years and depending on the length of the course, upon successful completion, the student will receive a certificate or an associate’s
    Axis AL 36505 degree. There are also opportunities available for those who join the Armed Forces to receive specialized training in the HVAC field.

    Licensing

    After completing the training program successfully, earning a certification or a degree, sitting for the HVAC licensing exam will be required by most states to work in this field. The licensing exam will differ somewhat from one location to another. The main consideration is the knowledge of all the aspects of installation and repair Axis AL 36505 of HVAC systems. In addition, some licensing exams require the applicant to know electrical codes.
    1     If the career chosen will include working with refrigerants, a separate certification is needed for this field. This includes high and low-pressure refrigerants and servicing small appliances. When this career is chosen at an early age, usually while in high school, it is beneficial to take classes that can help in preparing the student for the classes they will take Axis AL 36505 next. The basic recommendations are mathematics, physics, electronics and mechanical drawing.

    There are additional licenses needed if the HVAC career will include contractor services. This is often a career that is chosen after learning the other aspects of HVAC. The qualifications to apply for a license as an HVAC contractor include being at least 18 years of age, speaking and reading the English language and four years of verifiable experience in warm heating.
    2 If the applicant Axis AL 36505 meets these qualifications, they must take an ICC examination. The International Code Council (ICC) develops these exams and they are in charge of giving them for many states. They are given at approved testing sites across the nation and are required for anyone that represents themselves in any way as an HVAC contractor.

    As seen, the HVAC career is quite diverse. It can include various aspects of this profession, each having their own requirements and Axis AL 36505 licenses.

    air conditioning techniciannorthwest hvac/r training center

     

    Surrounding Areas In Alabama

  • HVAC Certification Training in Brownsboro AL 35741
  • HVAC Certification Training in Locust Fork AL 35097
  • HVAC Certification Training in Huxford AL 36543
  • HVAC Certification Training in Northport AL 35473
  • HVAC Certification Training in Webb AL 36376
  • HVAC Certification Training in Jackson AL 36545
  • HVAC Certification Training in Birmingham AL 35201
  • HVAC Certification Training in Clanton AL 35045
  • HVAC Certification Training in Normal AL 35762
  • HVAC Certification Training in Montgomery AL 36101
  • Axis Information

    Video: HVAC Certification in Axis AL

    [ssyelp location="Axis AL" term="schools" limit="10"]